INDUSTRIAL WALL TYPE COOLERS – PCF

• Built with high-quality raw materials: 5/8” copper tubes (0,43 mm thickness) expansion-jointed in aluminium fins with 8 o 10 mm thickness.
• Internal careful cleaning of tubes.
• Pressure checked: supplied with a dry nitrogen charge.
• Outlet connection and liquid distributor, with the circuits and lengths appropriate for each application.
• Can be supplied:
  -Equipped for GLYCOL WATER or similar.
  – Different fin spacing.

• Structurally solid casing, in aluminium with white removable protection plastic, to prevend scratches during the transport and the setting up.
• Laterals easy to dismantle to manipulate the expansion valve and the electrical connections.
• Stainless steel bolts and supports.
• External and internal tray, to avoid external condensation, in aluminium, for an easy and convenient intervention.
• STAINLESS STEEL, for a wider application, even in the strictest sectors of the food chain.

Air coolers equipped with Ziehl-abbeg or EBM fans, with external rotor and thermal protection:

• The fans have safety grilles, in painted steel, according to the current safety regulations (CE).
• The engines are wired to an own ground terminal.
• The arrow air is indicated according CECOMAF regulation, on the distance at which the velocity is 0’25 m/s with the air coolers laid on the ground, without obstacles in his the way of the air.
• The fans and resistances are wired in a respectively boxes, with a protection degree IP-54.
• Can be supplied:
  -different ELECTRICAL specifications to those mentioned.
  -HOOP RESISTANCES for fans: in cooling or freezing chambers with extreme humidity conditions.

In the electric defrost, the principal resistance characteristics are:

• Reinforced stainless steel materials, with vulcanized terminals on the tube: high protection against humidity and ice.
• Strategically distributed, depending on the air cooler heat requirement.
• Featured with special fixation on the end, to prevend movements by dilation.